P3 Respirator CE Filter

P3 Respirator CE Filter
Product Introduction:
P3 Respirator CE Filter 702 – CE-certified 99.95% efficiency for maximum particulate protection.
Send Inquiry
Description
Technical Parameters

Organic Vapor & Acid Gas Protection: Technical Specification for Filter 702

 

Organic Vapor Acid Gas cartridge

The ZKBESTA Model 702 is a combination filter cartridge designed for respiratory protection against specific gaseous contaminants and particulates.

It is classified as Type A1E1 for gas/vapor filtration and Class P3 for particle filtration under European standards.

The filter housing is marked with the classification "A1E1" and model number "702", and carries the CE mark, indicating conformity with Regulation (EU) 2016/425 and the harmonized standard EN 143:2000 for particulate filters.

 

 

 

 

 

For procurement and technical evaluation, the key parameters are its filtration efficiency, gas adsorption capacity, and physical compatibility with existing respirator systems.

 

Technical Parameters & Compliance

 

The following table details the performance specifications for the Model 702 filter, referencing the applicable test standards and minimum requirements.

Parameter

Test Standard

ZKBESTA Value (Typical)

EN Minimum Requirement

Total Inward Leakage (TIL)

EN 143:2000

≤ 2% (Geometric Mean)

≤ 2% (P3 Class)

Gas Filter Type

EN 14387:2004+A1:2008

A1E1

N/A

A1 Capacity (Organic Vapor)

EN 14387

> 60 minutes

> 35 minutes (for CH2Cl2)

E1 Capacity (Acid Gas)

EN 14387

> 60 minutes

> 20 minutes (for SO2)

Breathing Resistance (Inhalation)

EN 143:2000

< 1.5 mbar @ 95 L/min

< 3.0 mbar (P3 Class)

Breathing Resistance (Exhalation)

EN 143:2000

< 1.0 mbar @ 160 L/min

< 3.0 mbar (P3 Class)

Connection Type

EN 148-1

Bayonet (RD 40x1/7")

Standard for half masks

 

 

Gas & Vapor Protection Capabilities (A1E1 Classification)

 

The "A1E1" designation defines the specific gases and vapors this filter is engineered to protect against. It is a combination filter, meaning it contains both a particulate pre-filter layer (P3) and an activated carbon layer for gas adsorption.

Type A1: Organic Vapors

This classification indicates protection against organic gases and vapors with a boiling point > 65°C.

Typical Contaminants: Solvents like acetone, benzene, gasoline, paint thinners, and xylene.

Application: Suitable for spray painting, chemical handling, and degreasing operations where organic solvent concentrations do not exceed 1000 ppm (0.1% by volume).

Type E1: Acid Gases

This classification indicates protection against specific acid gases.

Typical Contaminants: Sulfur dioxide (SO2), hydrogen chloride (HCl), and other inorganic acid gases.

Application: Relevant for chemical processing, pickling operations, and certain laboratory environments.

The capacity test, conducted per EN 14387, measures the breakthrough time-the duration it takes for the concentration of a test gas on the clean-air side of the filter to reach a specified level. A higher capacity indicates a longer service life before the filter becomes saturated and needs replacement.

 

Contact now

 

 

 

Physical Compatibility & Integration

The Model 702 filter utilizes a standard bayonet-style connector, which is widely compatible with half-mask respirators from major manufacturers that adhere to the EN 140 standard.

Connection Standard: The bayonet fitting is designed to mate securely with the corresponding inlet ports on a half mask, ensuring an airtight seal.

Cross-Brand Compatibility: While designed for use with ZKBESTA half masks, the standard connection often allows for use with other brands. However, users must verify physical fit and seal integrity before use in a hazardous environment.

Low-Profile Design: The filter's shape is engineered to provide a wide field of vision and minimize interference with other Personal Protective Equipment (PPE), such as safety helmets or eye protection.

half facepiece reusable respirator

 

 

 

 

Procurement & Supply Information

 

For distributors and HSE managers evaluating supply chain options, the following commercial terms apply to the Model 702 filter.

Term

Detail

Minimum Order Quantity (MOQ)

500 pieces per model

Standard Lead Time

15-25 days after order confirmation

Packaging

10 pieces per box, 120 pieces per carton

OEM Services

Custom logo printing and packaging available (MOQ applies)

Factory Audit

ISO 9001 certified facility; audit reports available upon request

Port of Loading

FOB Xiamen, China

Contact now

 

 

FAQ

 

1.Q: What is the service life of the A1E1 filter 702 in a spray painting environment?

A: Service life depends on contaminant concentration, humidity, and breathing rate. There is no fixed duration. Implement a change-out schedule based on sensing taste/smell (breakthrough), increased breathing resistance, or a calculated schedule per EN 14387 Annex D.

 

2.Q: Can the Model 702 filter be used with a 3M half-mask respirator?

A: The filter uses a standard bayonet connection common to many EN 140 certified half masks. While physically compatible with many models, including some from 3M, users must perform a user seal check to ensure a proper fit before relying on it for protection.

 

3.Q: What documentation is provided with a bulk order of filters?

A: Each shipment includes a Declaration of Conformity (DoC) stating compliance with Regulation (EU) 2016/425 and EN 143:2000. Test reports from the Notified Body and material safety data sheets (MSDS) are available upon request.

 

why choose us
 

Ready to evaluate the Model 702 for your respiratory protection program?

gas respirator maunufacture supplier exhibition

ZKBESTA is a professional manufacturer of industrial respiratory protection PPE with 14 years of cross-border export experience. Having supplied certified respirators to EU markets for over a decade, we fully master the production and testing standards required by EU EN 149 regulation. Every  respirator we produce undergoes strict quality control to meet EU safety requirements, delivering reliable, CE-certified respiratory masks for industrial wholesale and bulk export clients across Europe.

 

Welcome to inquire :

Joly pan 

Whatsapp:08618259450587

Email:hitechos002@163.com

 

Hot Tags: p3 respirator ce filter , China p3 respirator ce filter manufacturers, suppliers, factory, respirator filter for consumer markets markets, disposable respirator filter, respirator filter for air quality improvement, vapor budget friendly cartridge, respirator filter for bulk purchase, organic vapor demand forecast

Send Inquiry
ZK-BEST(XIAMEN) ENVIRONMENT SCIENCE & TECHNOLOGY CO.,LTD
We are able to perform R&D for different customers with variant requirement.
contact us