Product Overview & OEM/ODM Capabilities

The ZKBESTA 92701mix face shield with forehead protection is a CE-marked (EU 2016/425) industrial face shield engineered for high-risk environments including welding, steel production, and electrical maintenance.
The facepiece utilizes injection-molded polycarbonate (PC) lens material paired with a resilient aluminum alloy (6063-T5) forehead bracket, delivering certified impact resistance (EN166 FN2) and UV filtration (EN166 3-1.2). The shield provides full-face coverage from supra-orbital ridge to chin, protecting against flying debris, molten metal splashes, and chemical aerosols.
OEM/ODM capabilities include custom mold development (lead time 30–45 days for new tooling), silk-screen or pad-print logo application (minimum order 1,000 pcs), custom packaging with barcode/QR code integration, and CE label compliance printing per Notified Body requirements.
The factory operates ISO9001:2015 certified production lines with AQL 2.5 batch inspection and full traceability documentation per shipment.
Material & Technical Specifications
|
Parameter |
Test Standard |
ZKBESTA Value |
EN/ANSI Minimum Requirement |
|
Lens Material |
EN166 |
Polycarbonate (PC), 1.5mm nominal thickness |
Impact-resistant thermoplastic |
|
Frame Material |
- |
Aluminum alloy 6063-T5, anodized finish |
Rigid, non-corrosive material |
|
Impact Resistance |
EN166 FN2 |
120m/s ball impact, no fracture |
FN2: ≥120m/s |
|
Optical Class |
EN166 |
Class 1 |
Class 1 minimum |
|
Anti-fog Coating |
EN166 |
Permanent anti-fog treatment (both sides) |
No fogging under normal use |
|
Scratch Resistance |
EN166 |
Hard-coated exterior surface |
Minimal visible scratching post-abrasion |
|
Weight |
- |
335g per unit |
- |
|
Forehead Protection |
- |
Full aluminum alloy brow guard |
Full face coverage from forehead |
|
UV Filtration |
EN166 3-1.2 |
UV400 / blocks 99.9% UVA+UVB |
≤1% UV transmission at 380nm |
|
Service Temperature |
- |
-20°C to +150°C |
No deformation at operating temps |
|
Certifications |
EU 2016/425 |
CE Mark (Cat. III), EN166, ANSI Z87.1 |
CE marking mandatory for EU |
Quality Control & Certification Compliance
Every ZKBESTA face shield undergoes a documented quality assurance protocol prior to shipment:
Incoming material inspection: PC resin certificate of analysis (COA) verified per batch; aluminum frame anodization thickness measured via eddy current (target ≥12μm).
In-process QC: Dimensional checks (lens diameter, frame width, strap attachment points) at 100% inspection rate; impact test samples drawn at 1 unit per 500 pcs production lot.
Pre-conditioning tests: Units subjected to thermal cycling (-30°C to +70°C, 5 cycles per EN166 Clause 5.3) followed by impact and optical clarity re-test.
Final inspection: AQL 2.5 (major defects) / AQL 1.0 (critical defects) per ISO 2859-1; visual check for scratches, coating defects, frame deformation.
CE documentation: Technical file compiled per Annex IV of EU Regulation 2016/425; CE certificate verifiable in NANDO database; Declaration of Conformity included with each carton.
Factory audit readiness: ISO9001:2015 certified facility; BSCI social compliance audit available; full batch traceability via lot numbering and production date coding.
Industrial Application & Hazard Matching
1. Welding Operations (MIG/TIG/Stick)
The PC lens with tint options and aluminum forehead guard protects against UV/IR radiation, spatter splash, and intense visible glare. Suitable for welding currents up to 200A with appropriate lens shade selection. Compatible with standard welding helmets and hard hat adapters.
2. Steel Manufacturing & Foundry
High-temperature resistance (surface tolerance up to 150°C) and impact-resistant PC material shield against molten metal splashes, slag, and radiant heat. The aluminum frame conducts heat away from the forehead zone, reducing thermal load during extended exposure.
3. Electrical Maintenance & Utilities
Non-conductive PC lens material provides dielectric protection (tested per ANSI Z87.1 dielectric requirements). The shield mounts on standard hard hat suspension systems for combined head and face protection in live-work scenarios. Anti-static surface treatment prevents charge accumulation.
4. Chemical Handling & Laboratory
The smooth PC surface and anodized aluminum frame resist corrosion from most industrial chemicals (verify specific chemical compatibility chart separately). The full-face coverage design prevents splash contact with eyes and facial skin. Suitable for use with respirator systems where facepiece seal integrity is required.
FAQ
Q: What impact resistance rating does the ZKBESTA 92701mix face shield carry under EN166?
A: The 92701mix carries EN166 FN2 rating, verified at 120m/s projectile impact velocity with no lens fracture or dislodgement. This exceeds the basic FN1 threshold (45m/s) and meets requirements for high-impact industrial environments including welding and metal fabrication.
Q: What are the MOQ and customization options for OEM face shields with private label branding?
A: Standard MOQ for silk-screen logo printing is 1,000 pcs per design; for custom mold development (lens shape/frame geometry), MOQ is 5,000 pcs with a tooling lead time of 30–45 days. Custom packaging with barcode, QR code, and language-specific labeling is available at MOQ 2,000 pcs. CE label printing per your Notified Body requirements is included.
Q: How does humidity and repeated washing affect the anti-fog coating lifespan on this face shield?
A: The permanent anti-fog treatment is chemically bonded to the PC substrate during injection molding, not a topical coating. Under normal industrial use with mild soap and water cleaning, the anti-fog performance remains effective for the product service life (typically 2–3 years). Avoid solvent-based cleaners (acetone, MEK) which degrade the hard coat. Replace lens if optical clarity deteriorates below EN166 Class 1 thresholds.
About ZKBESTA
Our company was established in 2014, is a Chinese national high-tech enterprise and multiple national industry standard drafting units .Over the years, our company has been dedicated to providing safe and effective respiratory protection solutions for large and medium-sized Chinese and foreign state-owned enterprises, private enterprises, and other organizations. And has launched integrated solutions for deep adaptation of respiratory , offers integrated protection solutions tailored to specific industries such as petroleum, chemicals, shipbuilding, mining and metallurgy, and metal smelting, covering respiratory, hearing, eye/face, and head protection.
Professional team
20+R&D staff
30+ Marketing team members
7x24 hours delivery
7×24‑hour customer service

Hot Tags: face shield with forehead protection, China face shield with forehead protection manufacturers, suppliers, factory, , , , Impact Resistant Face Shield, hearing protection face shields
