Description

Technical Parameters

Products Introduction

KP95 Organic Respirator Mask

This organic vapor particulate respirator with carbon layer helps provide respiratory protection where metal fumes may be present including those with ozone* and nuisance level organic vapors*.

ZKBESTA uses a variety of innovative technologies and features to help you meet your respiratory protection and comfort needs. The specially designed cake-resistant filter media provides longer respirator life.

Key Technology Of Organic Respirator Mask

Adopting Melt Blown Carbon Technology (Non Adhesive Process):

utilizing the viscosity of the fibers themselves to adhere and wrap activated carbon particles inside the fibers, without the need for additional adhesive

Respirator For Dust Particles technology

Carbon Particles Are Distributed In A Three-Dimensional Manner:

Particle carbon penetrates the entire material and comes into contact with harmful gases more fully, extending the protection time against harmful gases by more than twice

Respirator For Dust Particles material carbon fabric

Non-Adhesive Activated Carbon Fabric:

Compared with the traditional activated carbon cloth with glue, it has the advantages of good uniformity, high permeability, no odor, high carbon content, and the activated carbon particles are not easy to come off, and it has a good adsorption effect on all kinds of industrial waste gas, such as benzene, formaldehyde, sulfur dioxide, and so on.

Respirator For Dust Particles in side materials

Two Layers Activated Carbon Meltblown Fabric

Two layers of carbon particle cloth can more effectively defend against harmful organic vapors. At the same time, the outer layer of meltblown cloth filters out a portion of the particles, reducing the filtering burden on the inner layer. This allows the electrostatic adsorption function of the inner layer and the adsorption capacity of activated carbon to last longer, thereby extending the overall service life of the mask and reducing the frequency of mask replacement to a certain extent, thereby lowering the cost of use.

Usage of KP95 organic vapor respirator mask

This KP95 organic vapor respirator mask is intended for industrial procurement, not medical use.

Typical application scenarios include:

Welding and metal fabrication workshops

Grinding, cutting, and polishing operations

Manufacturing sites with nuisance organic gases

Construction and industrial maintenance environments

The activated carbon layer enhances adsorption of organic odors and low-concentration vapors, while the KP95 structure ensures stable particulate filtration.

Pictures of organic vapor respirator mask

disposable organic vapor respirator inside

Soft Sponge Face Touch Seal

inner soft fabirc

Cool Flow Exhalation Valve

Braided headbands

--Soft Sponge Face Touch Seal--

① The sponge material is more soft andcomfortable when long time wear. Reduce face pressure when long time wear

② Sponge material is flexible. Can full cover face and reduce air leakage

--Valve Design--

①Effectively remove moisture and heat; Respirator Face Mask inside more dry during wearing.

② Help reduce breath resistant. Do not hold your breath.

--Head Belt Wear--

① This design will helps reduce ear pressure and pain during long time use.

② Easy wear and took off when have rest during work. And can hang in nect when not use.

FAQ – Organic Respirator Mask

Q1: Is this organic respirator mask certified to GB2626-2019?

Yes. This disposable respirator is manufactured in accordance with GB2626-2019 and meets KP95 filtration requirements (≥95% for non-oil and oil particles). It is suitable for markets and projects where GB2626 compliance is specified.

Q2: What type of organic vapors does the activated carbon layer address?

The integrated activated carbon layer is designed to reduce nuisance-level organic vapors and odors, such as those commonly generated during welding, metal processing, and industrial manufacturing.
It is not intended to replace cartridge respirators for high-concentration or unknown organic gases.

Q3: Is this mask reusable?

No. This is a single-use disposable KP95 respirator mask. Reuse is not recommended once the mask becomes contaminated, damaged, or breathing resistance increases.

Q4: Is this organic respirator suitable for welding applications?

Yes. This model is commonly used in welding and metal fabrication environments where particulate fumes and low-level organic vapors are present. For heavy welding fumes or high-risk exposure, higher-level respirator systems should be evaluated.

Q5: Can this product be supplied in bulk for industrial procurement?

Yes. We provide bulk supply for B2B buyers, including distributors, factories, and project contractors. Packaging is 12 pcs per box, 180 pcs per carton, suitable for warehouse storage and large-scale distribution.

Q6: Do you offer OEM or private label service?

Yes. We support OEM customization, including logo printing and customized packaging for bulk orders. OEM availability depends on order quantity and production schedule.

Q7: What is the minimum order quantity (MOQ)?

MOQ may vary depending on OEM requirements and packaging customization. Please contact us directly to confirm current MOQ and lead time for your procurement plan.

Q8: Is this organic respirator mask suitable for medical or healthcare use?

No. This product is designed for industrial use only and is not intended for medical, surgical, or healthcare applications.

Q9: Can you provide technical documentation for procurement evaluation?

Yes. Upon request, we can provide product specifications, packaging details, and bulk order information to support internal approval and supplier qualification processes.

Our Certificate